PACOM TRAINING COURSES

We run a series of standard training courses for our end customers and VARs. In addition we also develop customized training courses upon request. Customized training gives your staff the opportunity to learn and grasp key technical aspects of the PACOM solution which relate directly to their day to day business.

Contact us today to find out more or book any of the scheduled training courses in the UK and USA below. For availability please contact the local PACOM office. Contact details are found under each training date.

PACOM TRAINING COURSES USA

TECHNICIAN: INTRODUCTORY TECHNICAL TRAINING

1-day technician introductory training. This module introduces PACOM’s comprehensive line of security solutions, including PACOM configuration software – GMS. It is intended for technicians who will be installing, configuring and maintaining these solutions.

To best benefit from the training, a basic understanding of security installations, using computer applications and computer networks as well as good wiring skills are an advantage.

Part number: 700 001 001
Type code: CR-INST-INT

Dates:

September 11

November 13

Location: Sarasota, Florida

TECHNICIAN: ADVANCED TECHNICAL TRAINING

2-day technician advanced GMS training. This training carries on from the Technician – Introductory Technical training course. In this course you will have the opportunity to further use and familiarize yourself with PACOM GMS software and to configure a typical security solution. You will run through a range of tasks detailing Controller, alarm area and access control configuration.

To best benefit from this training, an existing knowledge of GMS menus and dialog boxes and an understanding of security industry terminology are an advantage.

Part number: 700 001 002
Type code: CR-INST-ADV

Dates:

September 12-13

November 14-15

Location: Sarasota, Florida

TECHNICIAN: GMS CONFIGURATION TRAINING

2-day technician GMS configuration training. GMS is the focus of this module. We begin by installing a comprehensive GMS server and workstation setup, then a look at the different application modules in GMS, such as the Card Access Manager, Events Manager and Transaction Manager. Also covered is configuring communications between GMS and third-party DVRs. Towards the end we look at maintaining a working GMS.

The training is intended for technicians/administrators with experience using PACOM GMS. If you don’t have a working knowledge of GMS – for technicians, completing the Introductory Technical and Advanced Technical courses is mandatory; for administrators, completing the Introductory Operator, Event Response and Access Management courses is mandatory.

Part number: 7001 001 003
Type code: CR-INST-GMS

Dates: 

September 14-15

November 16-17

Location: Sarasota, Florida

 

PACOM TRAINING COURSES UK

TECHNICIAN: INTRODUCTORY TECHNICAL TRAINING

1-day technician introductory training. This module introduces PACOM’s comprehensive line of security solutions, including PACOM configuration software – GMS. It is intended for technicians who will be installing, configuring and maintaining these solutions.

To best benefit from the training, a basic understanding of security installations, using computer applications and computer networks as well as good wiring skills are an advantage.

Part number: 700 001 001
Type code: CR-INST-INT

Dates:

August 21- 8 places

September 4- 8 places

Location: Leeds, UK

TECHNICIAN: ADVANCED TECHNICAL TRAINING

2-day technician advanced GMS training. This training carries on from the Technician – Introductory Technical training course. In this course you will have the opportunity to further use and familiarize yourself with PACOM GMS software and to configure a typical security solution. You will run through a range of tasks detailing Controller, alarm area and access control configuration.

To best benefit from this training, an existing knowledge of GMS menus and dialog boxes and an understanding of security industry terminology are an advantage.

Part number: 700 001 002
Type code: CR-INST-ADV

Dates:

September 5-6 – 8 places

Location: Leeds, UK

TECHNICIAN: GMS CONFIGURATION TRAINING

2-day technician GMS configuration training. GMS is the focus of this module. We begin by installing a comprehensive GMS server and workstation setup, then a look at the different application modules in GMS, such as the Card Access Manager, Events Manager and Transaction Manager. Also covered is configuring communications between GMS and third-party DVRs. Towards the end we look at maintaining a working GMS.

The training is intended for technicians/administrators with experience using PACOM GMS. If you don’t have a working knowledge of GMS – for technicians, completing the Introductory Technical and Advanced Technical courses is mandatory; for administrators, completing the Introductory Operator, Event Response and Access Management courses is mandatory.

Part number: 7001 001 003
Type code: CR-INST-GMS

Dates: 

TBD

GMS INTRODUCTION – 1 DAY

1-day GMS introduction training.

Dates:

TBD

Location: Leeds, UK

GMS ALARM- 1 DAY

1-day GMS Alarm training.

Dates:

TBD

Location: Leeds, UK

GMS ACCESS – 1 DAY

1-day GMS Access training.

Dates:

TBD

Location: Leeds, UK

UNISON

2-day Unison training.

Dates:

August 22-23 – 8 places

Location: Leeds, UK

EMCS

2-day EMCS training.

Dates:

August 17-18 – 8 places

Location: Leeds, UK

CUSTOMER TRAINING EVENT

Part number: 900 200 800

Type code:  CR-OP-FULL