PERIPHERAL DEVICES FOR A COMPLETE SOLUTION

We offer an extensive range of readers, keypads and expansion modules that add functionality to our integrated access control and intrusion controllers. Note that some peripheral devices are available on selected markets only.

KEYPADS

Our keypads provide a local alarm system user interface compatible with all PACOM controllers. You can manage up to eight individual alarm areas and use the keypad to view the status of up to 32 alarm areas within a site. You can view entry keys, LEDs for alarm area status and a backlit LCD with adjustable contrast.

The PACOM 8101 series keypad features a classic design and intuitive button symbols for simple user operation. Equipped with a 2-line x 16 character liquid crystal display (LCD) and soft-touch buttons, the PACOM 8101 keypad can be used for local management of alarm areas. The PACOM 8101 series keypad communicates via RS485 to the PACOM controllers. Any alarm area can be managed by the keypad and tri-color LEDs can be assigned to indicate the status of each alarm area.

Two models are available – the 8101A, which is designed purely for PIN-based alarm operation; and the 8101, which includes an integrated single door controller for access control and simple PIN-free system operation. Both keypad models are compatible with PACOM 1057, 1058 and 8000 series controllers.

PACOM 8101 KEYPAD is currently available on the following markets:

  • All markets

I/O CARDS AND MULTI INTERFACE

In order for you to grow your alarm management and increase the capacity of your current solution we offer a range of I/O expansion cards. These are easily connected to the main alarm and access controller.

The PACOM 8501 Input/Output Card is an IP device that enables intrusion detection using your existing Ethernet network. The PACOM 8501 provides a native connection for up to 16 supervised alarm inputs, 2 relay driven outputs and 3 general purpose open collector type outputs. In addition to these onboard connections the capacity of the 8501 can be easily expanded by accommodating up to 2 PACOM 8000 series expansion cards.

PACOM 8501 input output card

This flexibility means that the 8501 can be tailored to meet a wider range of applications. The 8501 has also been specifically engineered so that it can be conveniently installed in any location rated for a 3U rack mount device.

PACOM 8501 INPUT/OUTPUT CARD is currently available on the following markets:

  • APAC
  • Europe (excluding Nordics)
  • Americas
  • Middle East
PACOM 8602 MULTI INTERFACE supports two readers and is an excellent addition to PACOM 8002 integrated access control and intrusion controllers. By using the same serial connection as other PACOM devices, the installation becomes easy and cost effective. PACOM 8602 multi interface can be easily scaled up to meet your needs now and in the future.

PACOM 8602 multi interface

PACOM 8602 MULTI INTERFACE is currently available on the following markets:

  • Nordics

READERS AND ACCESSORIES

Feature your company logotype in a stylish, high-end reader with touch functionality, or use our slim reader with vandal proof housing to create access to areas with limited space and visibility.

PACOM PREMIUM TOUCH is a completely new type of reader with MIFARE, MIFARE Plus or DESFire, whose unique and stylish design integrates security into the business operation in a discreet, innovative and appealing manner. The figures’ location on the screen may be randomly selected to reduce the risk that an unauthorized person sees the PIN when typed. This increases the user’s feeling of security.

PACOM premium touch reader with mounting plate

The uniqueness of PACOM PREMIUM TOUCH lies within its 3.2’’ touch screen which can be configured to display any logotype or image. With this technology, visitors can get a first contact with your company via a stylish and modern unit in connection to their visit at your company.

PACOM PREMIUM TOUCH is currently available on the following markets:

  • Nordics
PACOM SLIM is an optimal reader which, due to its “slimmed” design opens up the possibility for secure passage solutions at facilities with limited space and narrow environments. The illuminated membrane keyboard has a built-in self-adjustment of the brightness level and is automatically illuminated when needed, making the reader a suitable alternative even in environments with limited lighting.

PACOM slim reader with vandal proof housing and mounting plate

In order to prevent damage to your PACOM SLIM reader you can expand your solution with a PACOM vandal proof housing. The vandal proof housing is designed to hinder vandalism such as tampering, kicks and punches. If the reader needs to be mounted on an uneven surface, a mounting plate specifically designed for the PACOM SLIM is available.

PACOM SLIM is currently available on the following markets:

  • Nordics

DOOR, VAULT AND ELEVATOR CONTROLLERS

Our door controllers function as a link between the main alarm and access controller and a card reader device or door. On-board memory capabilities allows the door controllers to store details of access cards or codes used enabling it to operate at a limited level when offline to the main controller.

Our vault controllers are designed for connecting certain vault equipment such as seismic vibration detectors and vault doors with our main alarm and access control controllers.

When in need to control access to floors serviced by an elevator a PACOM elevator controller will cater your needs. Generally, a card reader is installed in the elevator car and when a valid card is swiped, the selection buttons for the floors authorized for that cardholder can be activated. Once a floor selection button is pressed, no other floor can be selected.

The PACOM 1076 two-door controller is a dual card reader access control interface designed specifically to operate with PACOM controllers and security management software. It also provides redundancy operation (“degraded mode” operation) should the door controller become offline to the system in that it either stores the last used access cards or is programmed to allow access based on access card facility code only.
The 1076 provides a hard-wired interface connection for two independent access control devices using standard Wiegand or magnetic stripe formats.

PACOM 1076 two door controller

Each reader port provides four end-of-line (EOL) supervized inputs (door status, egress, strike monitor and one spare), and two relay outputs. The 1076 communicates via multi-drop RS485 port to various PACOM controllers. The number of PACOM 1076 modules that can be connected depends upon the capacity and configuration of the PACOM controller.

PACOM 1076 TWO DOOR CONTROLLER is currently available on the following markets:

  • All markets
The PACOM 1064 door controller is a single card reader access control interface designed specifically to operate with PACOM controllers and security management software. It also provides redundancy operation (“degraded mode” operation) should the door controller become offline to the system, in that it either stores the last used access cards or is programmed to allow access based on access card facility code only.

PACOM 1064 single door controller

The 1064 provides a hard-wired interface connection for one independent access control device using standard Wiegand or magnetic stripe formats. Each reader port provides four end-of-line (EOL) supervised inputs (door status, egress, strike monitor and one spare), and two relay outputs. The 1064 communicates via multi-drop RS485 port to various PACOM controllers. The number of PACOM 1064 modules that can be connected depends upon the capacity and configuration of the PACOM controller.

PACOM 1064 SINGLE DOOR CONTROLLER is currently available on the following markets:

  • All markets
The PACOM 1076 Vault Controller is specifically designed for controlling vault/ATM opening operation and operates with PACOM Controllers. The 1076 Vault Controller communicates with controllers via multi-drop RS485 device line.

The 1076 Vault Controller does more than detect alarm panel inputs and set output requests to an alarm panel. It will control a vault/ATM so that it is can be opened only if pre-defined conditions are satisfied. This helps ensure the prevention of unauthorized access.PACOM 1076 vault controller

 

The 1076 Vault Controller also has an optional 4-digit 7-segment LED display. This is used to indicate vault related timers, such as remaining vault open time and similar.

PACOM 1076 VAULT CONTROLLER is currently available on the following markets:

  • All markets
The PACOM 1065 ELEVATOR CONTROLLER is used to control access to floors serviced by an elevator, where a low-level elevator interface is used. This is performed by interrupting the wiring between the elevator and its control panel using relays, so that the PACOM system determines whether or not the elevator can be accessed, and may also determine which floors can be selected.

Generally, a card reader is installed in the elevator car and when a valid card is swiped, the selection buttons for floors authorized for that cardholder can be activated. Once a floor selection button is pressed, no other floor can be selected.

PACOM 1065 elevator controller

The PACOM elevator controller also supports “apartment” operation. In this scenario, the person in the apartment can press a button to allow a visitor access to the floor that the apartment is on. When the visitor enters the elevator, only the floor that has granted the access is selectable.

When connected to a an integrated access control and intrusion controller, each PACOM elevator controller can control access to up to 16 consecutively numbered floors.

PACOM 1065 ELEVATOR CONTROLLER is currently available on the following markets:

  • All markets

ENCLOSURES AND POWER SUPPLIES

Charge back-up batteries with our power supplies developed to support the operation of our alarm and access control field controllers. Shelter and organize your solution by mounting all hardware components in our discrete enclosures. You can choose between different sizes and designs.

The PACOM standard wall-mount enclosure is designed to securely house PACOM hardware of all types, including multiple devices and combinations. The enclosure features mounting holes and a pre-drilled mounting plate for securing hardware devices. The enclosure has several removable sections for simplifying wiring connections and also features tamper switches (for cover removal and wall-mount disturbance) for increased security. The enclosure can for example accommodate a controller, power supply and backup battery, and several door controllers.

PACOM standard enclosure

PACOM STANDARD ENCLOSURE is currently available on the following markets:

  • Nordics
  • Europe
  • APAC
  • Middle East
The PACOM SMALL ENCLOSURE is designed primarily to securely house PACOM door controllers. The enclosure features mounting holes and a pre-drilled mounting plate for securing hardware devices. The enclosure has several removable sections for simplifying wiring connections and also features tamper switches (for cover removal and wall-mount disturbance) for increased security. The PACOM SMALL has a robust steel construction. The enclosure can for example accommodate two PACOM 1064 door controllers or one PACOM 1076 two-door controller.

PACOM small enclosure for door controllers

PACOM SMALL ENCLOSURE is currently available on the following markets:

  • Nordics
  • Europe
  • APAC
  • Middle East
PACOM LARGE BLUE ENCLOSURE is a wall-mount enclosure with removable lid. Includes tamper contact and mounting plate for PACOM 8002 controllers, 1064, 1076 and 1065 PCB’s.

PACOM large enclosure blue

PACOM LARGE BLUE ENCLOSURE is currently available on the following markets:

  • Americas
The PACOM 8303 power supply provides a regulated 15VDC supply for powering controllers and peripheral devices and to charge backup batteries. 8303s are configured, controlled and monitored remotely by means of PACOM security management software. A PACOM controller acts as an interface to the PACOM 8303 power supply and connects via the RS485 interface.

PACOM 8303 monitoring power supply
The 8303 features remote diagnostic capabilities that allow it to simulate power failure for testing backup batteries and to monitor DC output and battery voltages. The power supply itself and the mounting enclosure temperatures are also monitored. The 8303 is capable of notifying the security system if any monitored or diagnostic parameters fall outside specified limits.

PACOM 8303 MONITORING POWER SUPPLY is currently available on the following markets:

  • All markets

EXPANSION CARDS

Whenever you need to increase the capacity or functionality of your security solution, we offer a range of modular add-ons designed and developed to suit our main alarm and access control controller. Anything from additional memory or increased alarm capacity to back-up communications or options to increase the size of your solution.

The PACOM 8201 GPRS EXPANSION MODULE allows PACOM 8002 integrated access control and intrusion controllers to
communicate via GPRS. The expansion module includes an antenna.

PACOM 8201 GPRS expansion module

PACOM GPRS EXPANSION MODULE is currently available on the following markets:

  • All markets
PACOM 8203 4-OUTPUT EXPANSION MODULE consists of four general-purpose relay outputs (2A @12VDC) each with a Common (COM), Normally Open (NO) and Normally Closed (NC) option. PACOM 4-output expansion module is compatible with PACOM integrated access control and intrusion controllers PACOM 8002 and PACOM 8003 and PACOM MULTI INTERFACE.

PACOM 8203 4-output expansion module

PACOM 4-OUTPUT EXPANSION MODULE is currently available on the following markets:

  • All markets
PACOM 8204 8-INPUTS EXPANSION MODULE consists of 8 individual analog or digital inputs to be used for alarm input, analog inputs or pulse counting. This module also features random voltage-switching for additional tamper protection. PACOM 8-inputs expansion module is compatible with PACOM integrated access control and intrusion controllers PACOM 8002 and PACOM 8003 and PACOM MULTI INTERFACE.

PACOM 8402 8 inputs expansion module

PACOM 8-INPUTS EXPANSION MODULE is currently available on the following markets:

  • All markets
PACOM 8205 COMMS EXPANSION MODULE consists of an RS485 device loop or RS232 serial port used to connect additional devices to the integrated access control and intrusion controllers PACOM 8002 and PACOM 8003.

PACOM comms expansion module

PACOM COMMS EXPANSION MODULE is currently available on the following markets:

  • All markets
PACOM 8207 STAR COUPLER EXPANSION MODULE will split an on-board PACOM controller device loop into 4 device loops to enable star connection of PACOM I/O devices. PACOM star coupler expansion module is compatible with PACOM integrated access control and intrusion controllers PACOM 8002 and PACOM 8003

PACOM 8207 star coupler expansion module

PACOM STAR COUPLER EXPANSION MODULE is currently available on the following markets:

  • All markets
PACOM 8208 S-ART EXPANSION MODULE allows PACOM 8002 integrated access control and intrusion controller to communicate with S-ART devices.

PACOM 8208 s-art expansion module

PACOM S-ART EXPANSION MODULE is currently available on the following markets:

  • All markets
PACOM 8209 DIAL-UP EXPANSION MODULE allows PACOM 8002 and PACOM 8003 integrated access control and intrusion controllers to communicate via dial-up/PSTN. This module supports dial-up to either a PACOM receiver or 3rd party central station receiver supporting Contact ID or SIA alarm reporting protocols.

PACOM DIAL-UP EXPANSION MODULE is currently available on the following markets:

  • All markets
PACOM 8403 SODIMM MEMORY EXPANSION MODULE is a 64 MB SODIMM memory expansion for PACOM 8002 integrated access control and intrusion controllers. Expands the number of cards and transactions in the controller to handle up to 128 000 users.

PACOM 8403 sodimm memory expansion module

PACOM SODIMM MEMORY EXPANSION MODULE is currently available on the following markets:

  • All markets

Note: Not all peripheral devices are available in all markets. Contact your local sales representative for more information.