PACOM INTEGRATED SECURITY TRAINING COURSES

Become a PACOM integrated security expert! A good education lies in ours and your interests as knowledge about the system can prevent errors in installation and operation, which in turn saves time and unnecessary costs.

Pacom runs a series of standard training courses for our end customers and VARs. In addition, we also develop customized training courses upon request. Customized training gives your staff the opportunity to learn and grasp key technical aspects of the PACOM solution which relate directly to their day to day business.

Here you can review our current course offerings, our current training schedule and register online for the UK and USA. As a Pacom VAR, you can access all training documentation which is located in the Partner Portal of this site. For availability please contact the local PACOM office. Contact details are found under each training date.

PACOM INTEGRATED SECURITY TRAINING COURSES USA

1-day technician introductory training. This module introduces PACOM’s comprehensive line of security solutions, including PACOM configuration software – GMS. It is intended for technicians who will be installing, configuring and maintaining these solutions.

To best benefit from the training, a basic understanding of security installations, using computer applications and computer networks as well as good wiring skills are an advantage.

Part number: 700 001 001
Type code: CR-INST-INT

Dates:

April 17 – Available Seats – 7

June 12 – Available Seats – 8

 

Location: Sarasota, Florida

2-day technician advanced Pacom Hardware training. This training carries on from the Technician – Introductory Technical training course. In this course you will have the opportunity to further use and familiarize yourself with PACOM GMS Configuration software and to configure a typical security solution. You will run through a range of tasks detailing Controller, alarm area and access control configuration.

To best benefit from this training, an existing knowledge of GMS menus and dialog boxes and an understanding of security industry terminology are an advantage.

The Technician – Introductory Technical Training course (700 001 001) is a required prerequisite to the Technician – Advanced Technical Training course (700 001 002).

Part number: 700 001 002
Type code: CR-INST-ADV

Dates:

April 18-19  – Available Seats – 7

June 13-14  – Available Seats – 8

Location: Sarasota, Florida

2-day technician GMS configuration training. GMS is the focus of this module. We begin by installing a comprehensive GMS server and workstation setup, then a look at the different application modules in GMS, such as the Card Access Manager, Events Manager and Transaction Manager. Also covered is configuring communications between GMS and third-party DVRs. Towards the end we look at maintaining a working GMS.

The training is intended for technicians/administrators with experience using PACOM GMS. If you don’t have a working knowledge of GMS – for technicians, completing the Introductory Technical and Advanced Technical courses is mandatory; for administrators, completing the Introductory OperatorEvent Response and Access Management courses is mandatory.

Part number: 7001 001 003
Type code: CR-INST-GMS

Dates: 

TBD

 

Location: Sarasota, Florida

PACOM TRAINING COURSES UK

1-day technician introductory training. This module introduces PACOM’s comprehensive line of security solutions, including PACOM configuration software – GMS. It is intended for technicians who will be installing, configuring and maintaining these solutions.

To best benefit from the training, a basic understanding of security installations, using computer applications and computer networks as well as good wiring skills are an advantage.

Part number: 700 001 001
Type code: CR-INST-INT

Dates:

30/04/18 – 8 places

13/08/18 – 8 places

Location: Leeds, UK

2-day technician advanced GMS training. This training carries on from the Technician – Introductory Technical training course. In this course you will have the opportunity to further use and familiarize yourself with PACOM GMS software and to configure a typical security solution. You will run through a range of tasks detailing Controller, alarm area and access control configuration.

To best benefit from this training, an existing knowledge of GMS menus and dialog boxes and an understanding of security industry terminology are an advantage.

Part number: 700 001 002
Type code: CR-INST-ADV

Dates:

01/05/18 to 02/05/18 – 8 places

14/08/18 to 15/08/18 – 8 places

Location: Leeds, UK

2-day technician GMS configuration training. GMS is the focus of this module. We begin by installing a comprehensive GMS server and workstation setup, then a look at the different application modules in GMS, such as the Card Access Manager, Events Manager and Transaction Manager. Also covered is configuring communications between GMS and third-party DVRs. Towards the end we look at maintaining a working GMS.

The training is intended for technicians/administrators with experience using PACOM GMS. If you don’t have a working knowledge of GMS – for technicians, completing the Introductory Technical and Advanced Technical courses is mandatory; for administrators, completing the Introductory OperatorEvent Response and Access Management courses is mandatory.

Part number: 7001 001 003
Type code: CR-INST-GMS

Dates: 

03/05/18 to 04/05/18 – 8 places

16/08/18 to 17/08/18 – 8 places

1-day GMS introduction training.

Dates:

02/07/18 – 8 places

Location: Leeds, UK

1-day GMS Alarm training.

Dates:

03/07/18 – 8 places

Location: Leeds, UK

1-day GMS Access training.

Dates:

04/07/18 – 8 places

Location: Leeds, UK

3-day Unison training.

Dates:

06/06/18 – 08/06/18 – 8 places

Location: Leeds, UK

2-day EMCS training.

Dates:

26/07/18 to 27/07/18 – 8 places

Location: Leeds, UK

Part number: 900 200 800

Type code:  CR-OP-FULL

2-day GMS Administration training.

Dates:

05/07/18 to 06/07/18 – 8 places

Location:

Leeds, UK